LINX 2.0
25 July, 2017
  • TaskElevador móvil compacto

Drying endothermic system

(Ref. AE150)
The unique endothermic and portable drying system.
The endothermic wave makes possible an homogeneous dry and it's less aggressive than the traditionar IR.
Large surface of 1m2 and energy-saving.

ACCESSORIES KUADRATO AE150

AE150

AE150

AE151

AE151

TECHNICAL DATA
VOLTAGE 230 V single fase
SAFETY Double insulation
POWER 1400W (+350W with AE151)
AMPS 5.8 A
SIZES 120 x 98 cm (160 x 98 cm withAE151)
WEIGHT 12 Kg (+4 Kg con AE151)
PANNEL POSITION
It is advisable to position the panel between a minimum of 10 cm to a maximum of 15 cm away from the surface to be irradiated.
INSTRUCCIONES
The drying time can be set from 0 to 99 min.

Plug the timer into the outlet 230V, the timer will activate and illuminate the display.
Turn on the main switch on the left side of the timer to activate the large panel.
If you wish to also use the optional panel “veil”, always turn on the secondary switch on the left side.
Turn the center knob clockwise to set the time of processing. The display will show the time in progressively digits (minutes). .
Press the center knob to start the timer. The display will show the countdown.
Reached the preset time, the timer will issue an acustic signal announcing the end of the work.